Omron MX2 - Page 338

316
Parameter Settings for Keypad Entry Section C-2
B027 OC suppression selection 00 ✓
B028 Current level of active freq.
matching
Rated current ✓
B029 Deceleration rate of active freq.
matching
0.5 ✓
B030 Start freq. of active freq. matching 00 ✓
B031 Software lock mode selection 01 ✓
B033 Motor cable length parameter 10. ✓
B034 Run/power ON warning time 0. ✓
B035 Rotation direction restriction 00 ✕
B036 Reduced voltage start selection 2 ✓
B037 Function code display restriction 00 ✓
B038 Initial display selection 001 ✓
B039 Automatic user parameter
registration
00 ✓
B040 Torque limit selection 00 ✓
B041 Torque limit 1 (fwd/power) 200 ✓
B042 Torque limit 2 (rev/regen.) 200 ✓
B043 Torque limit 3 (rev/power) 200 ✓
B044 Torque limit 4 (fwd/regen.) 200 ✓
B045 Torque LAD STOP selection 00 ✓
B046 Reverse run protection 00 ✓
B049 Dual Rating Selection 00 ✕
B050 Controlled deceleration on power
loss
00 ✕
B051 DC bus voltage trigger level of
ctrl. decel.
220.0/400.0 ✕
B052 Over-voltage threshold of ctrl. decel. 360.0/720.0 ✕
B053 Deceleration time of ctrl. decel. 1.0 ✕
B054 Initial freq. drop of ctrl. decel. 0.0 ✕
B060 Maximum-limit level of window
comparators O
100. ✓
B061 Minimum-limit level of window
comparators O
0. ✓
B062 Hysteresis width of window
comparators O
0. ✓
B063 Maximum-limit level of window
comparators OI
100. ✓
B064 Minimum-limit level of window
comparators OI
0. ✓
B065 Hysteresis width of window
comparator (OI)
0. ✓
B070 Operation level at O disconnection no ✓
B071 Operation level at OI disconnection no ✓
B075 Ambient temperature 40. ✓
B078 Watt-hour clearance 00 ✓
B079 Watt-hour display gain 1. ✓
B082 Start frequency 0.5 ✓
B083 Carrier frequency 10.0 ✓
B084 Initialization mode (parameters or
trip history)
00
✕
B085 Initial value code 01 ✕
B086 Frequency scaling conversion factor 1.0 ✓
"B" Group Parameters Default Setting B031=10 User
Setting
Func.
Code
Name (EU)