– 91 – NWA-008845-001 Rev.5.0
32ch1002.fm
DESCRIPTION DATA
Specify whether no Dial Tone connection is
required for the answering method assigned by
CM64 Y=0.
•
(1)
(2)
Y=2
06
0 : No Dial Tone
1: Dial Tone
Specify the ringing cadence for an Automated
Attendant call.
(1)
(2)
180
0 : 0.4 seconds ON-0.2 seconds OFF-0.4
seconds ON-2 seconds OFF
[For North America]
Special Ringing
(See Interval of Ringing Tones by
CM08>392/CM08>396/
CM08>397. Page 337)
[For EU]
1 : As per CM35 Y=33
Specify the process when a call is transferred
by an Automated Attendant to a predetermined
station and time-out occurs.
(1)
(2)
359
0 : Disconnect call
1 : Continue call
Specify the process for an Automated Atten-
dant call when a caller dials while receiving
the message or music.
(1)
(2)
363
0 : Not allowed (Allowed after receiving
the message or music)
1 : Allowed
B
CM48
CM08
C
NOVEMBER/15/2006
AUTOMATED ATTENDANT
To Next Page
Loading...