– 92 – NWA-008845-001 Rev.5.0
32ch1002.fm
DESCRIPTION DATA
Specify the time before answering by Auto-
mated Attendant.
•
(1)
(2)
Y=0
59
00-08: 0-32 seconds
(4 second increments)
If no data is set, the default setting is 4-8
seconds.
Specify the time before an Automated Atten-
dant call is redirected because no digits are
received from the calling party.
•
(1)
(2)
Y=0
34
01-30: 4-120 seconds
(4 second increments)
If no data is set, the default setting is 32-36
seconds.
Specify the timing of unanswered call after
forwarding to predetermined station in Auto-
mated Attendant.
•
(1)
(2)
Y=0
39
01-30: 4-120 seconds
(4 second increments)
If no data is set, the default setting is 32-36
seconds.
Specify the time before Dial Tone timeout in
Automated Attendant.
•
(1)
(2)
Y=0
43
01-14: 1-14 seconds
(1 second increments)
If no data is set, the default setting is 14 seconds.
C
CM41
END
JULY/01/2006
AUTOMATED ATTENDANT