– 161 – NWA-008845-001 Rev.5.0
32ch1003.fm
DESCRIPTION DATA
Select the feature available in each tenant
when an internal call via CCIS and a Tie Line/
C.O. incoming call via CCIS are terminated.
NOTE: CM65 Y=37/38/39 is effective only
when CM08>608 2nd data=0.
•
•
•
(1)
(2)
Y=37 Internal Call or ATT assisted Call via
CCIS
Y=38 C.O. Incoming Call via CCIS
Y=39 Tie Line Incoming Call via CCIS
00-63: Tenant No.
0 : Split Call Forwarding
1 : Call Forwarding
Specify the timing of Call Forwarding-No An-
swer for a tie line incoming call.
[Series 3200 R6.2 software required]
(1)
(2)
126
0 : As per timing for internal call or an as-
sisted call
1 : As per timing for trunk incoming call
NOTE: The timing for a tie line incoming call is set as following data.
When CM08>126:0 is set:
When CM08>126:1 is set:
C
CM65
CM08
2ND DATA OF CM13 Y=46 TIMING FOR TIE LINE INCOMING CALL
0 As per CM41 Y=0>101
1 As per CM41 Y=0>15
2ND DATA OF CM13 Y=46 TIMING FOR TIE LINE INCOMING CALL
0 As per CM41 Y=0>100
1 As per CM41 Y=0>01
D
CALL FORWARDING
SPLIT CALL FORWARDING-NO ANSWER
To Next Page
Loading...