– 160 – NWA-008845-001 Rev.5.0
32ch1003.fm
DESCRIPTION DATA
Specify the setting method for Call Forward-
ing-No Answer-Outside.
(1)
(2)
222
0 : Setting when the station goes on hook/
when receiving Service Set Tone
(ORT time out)
1 : Setting when receiving Service Set
Tone (ORT time out)
Assign whether an extension can set a destina-
tion of Split Call Forwarding-No Answer-Out-
side by entering only a trunk access code.
(1)
(2)
386
0 : Restricted
1 : Allowed
Select the trunk route seized for Split Call
Forwarding-No Answer-Outside.
(1)
(2)
600
0 : By calling party’s tenant/terminating
trunk’s tenant
1 : By Call Forwarding setting station’s
tenant
Select the Call Forwarding type when an
incoming call terminates via CCIS.
(1)
(2)
608
0 : As per CM65 Y=37/38/39
1 : As per CM65 Y=23/24/25
Assign Call Forwarding-No Answer keys to
the D
term
s, as required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0016: Call Forwarding-No Answer Set/
Cancel
For setting the same key as Call Forwarding-
Busy Line.
(1)
(2)
My Line No. + + Key No.
F0012: Call Forwarding-No Answer/Busy
Line Set/Cancel
Assign Split Call Forwarding-No Answer keys
to the D
term
s, as required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0A82: Split Call Forwarding-Busy Line/
No Answer Set/Cancel
Select the feature available in each tenant
when an internal call and a Tie Line/C.O. in-
coming call are terminated.
•
•
•
(1)
(2)
Y=23 Internal Call or ATT assisted Call
Y=24 C.O. Incoming Call
Y=25 Tie Line Incoming Call
00-63: Tenant No.
0 : Split Call Forwarding
1 : Call Forwarding
B
CM08
CM90
,
,
,
CM65
C
CALL FORWARDING
SPLIT CALL FORWARDING-NO ANSWER
To Next Page
Loading...