– 183 – NWA-008845-001 Rev.5.0
32ch1003.fm
DESCRIPTION DATA
Specify the type of Single Data Message
Frame Format.
[Series 3400 R9.1 software required]
NOTE: This is required when using PN-
4RSTC-A.
(1)
(2)
489: Single Data Message Frame Format
0 : Without Time Parameter
1 : With Time Parameter
Specify the type of Single Data Message
Frame Format.
NOTE: This is required when using PN-
4RSTC.
•
(1)
(2)
Y=30
1: Single Data Message Frame Format
0 : With Time Parameter
1 : Without Time Parameter
Send ANI/Caller ID to SMDR.
NOTE 1: This is required when using AP00
card for SMDR.
(1)
(2)
143: Sending to SMDR terminal
0: Not sent
1: To send
NOTE 2: When 0 is set, the ANI is not sent
to the SMDR, but area code for
calling party, area code for
called party; authorization code
is sent to the SMDR.
Provide the D
term
with a select key of Calling
Number Display or Calling Name Display.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1099: Select Key of Calling Number Dis-
play or Calling Name Display
Provide the DESKCON with a select key of
Calling Number Display or Calling Name Dis-
play.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6122: Select Key of Calling Number Dis-
play or Calling Name Display
A
CM08
CIR INITIAL
CMDB
CMD000
CM90
,
,
END
CALLER ID CLASS
To Next Page
Loading...