Philips Sopho 2000 IPS - Page 200

– 182 – NWA-008845-001 Rev.5.0
32ch1003.fm
(5) Other Relational Data Assignment
DESCRIPTION DATA
Specify whether the UCD Priority Queuing is
set for each calling number or not.
•
(1)
(2)
Y=07 UCD Priority Queuing
0-1499: Development Table No.
0 : Not priority
1 : Priority
Specify the priority for calling name display. •
(1)
(2)
Y=12 Priority for Name Display
0-1499: Development Table No.
0 : Name received from network is dis-
played
1 : Name assigned by CMDB Y=00 is
displayed
DESCRIPTION DATA
Assign the trunk access code for outgoing call
sent to the SMDR.
For using Save & Repeat feature, this Trunk
Access Code will be saved and sent with the
calling number.
•
(1)
(2)
Y=44
Trunk Access Code for Save & Repeat
00-63: Trunk Route No.
0-9/00-99: Trunk Access Code
Specify whether the calling number is sent to
the OAI terminal or not.
(1)
(2)
462: Sending to OAI terminal
0: To send
1: Not sent
Specify whether the calling number is sent to
the SMDR terminal or not.
(1)
(2)
463: Sending to SMDR terminal
0: To send
1: Not sent
B
CMDB
END
START
CM35
CM08
A
NOVEMBER/15/2006
CALLER ID CLASS