Philips Sopho 2000 IPS - Page 205

– 187 – NWA-008845-001 Rev.5.0
32ch1003.fm
DESCRIPTION DATA
Assign the calling party number, which is used
for Calling Name search, to the 1000-Slot
Memory Block No. 3.
NOTE 1: When this feature is provided, the
1000-Slot Memory Block No. 3
cannot be used for Station Speed
Dialing.
NOTE 2: The calling party number must be
the number received from network,
including the area code.
•
(1)
(2)
Y=0
3 YY Z
3 : 1000-Slot Memory Block No. 3
NOTE 1
YY: 10-Slot Memory Block No. 00-99
Z : Memory Parcel No. 0-9
Stored No.:
Access Code (Maximum 4 digits) + +
Calling Party No. (Maximum 16 digits)
NOTE 2
NONE : No data
Assign the calling party name to be displayed
for the calling party number assigned by CM74
Y=0, to each Memory Slot number, by charac-
ter codes or characters.
•
(1)
(2)
Y=1
3 YY Z
3 : 1000-Slot Memory Block No. 3
YY: 10-Slot Memory Block No. 00-99
Z : Memory Parcel No. 0-9
XX...XX: Calling Party Name Character
Code (Maximum 32 digits, 16
characters)
NONE : No data
See APPENDIX B: Character Code Table.
Page B2
•
(1)
(2)
Y=2
3 YY Z
3 : 1000-Slot Memory Block No. 3
YY: 10-Slot Memory Block No. 00-99
Z : Memory Parcel No. 0-9
XX...XX: Calling Party Name Character
(Maximum 16 characters)
NONE : No data
Provide the D
term
with a select key of Calling
Number Display or Calling Name Display.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1099: Select Key of Calling Number
Display or Calling Name Display
Provide the DESKCON with a select key of
Calling Number Display or Calling Name Dis-
play.
•
(1)
(2)
Y=00
ATTCON No. (E000-E077) + + Key
No.
F6122: Select Key of Calling Number
Display or Calling Name Display
A
CM74
,
CM90
,
,
END
JANUARY/20/2006
CALLER ID DISPLAY