Philips Sopho 2000 IPS - Page 219

– 201 – NWA-008845-001 Rev.5.0
32ch1004.fm
HARDWARE REQUIRED
D
term
with LCD and DLC card
DESCRIPTION DATA
Assign the number of memory block which is
used for CID Call Back for each D
term
station.
NOTE 1: The memory block cannot be used in
common by multiple stations.
Set the memory block to each D
term
station respectively.
NOTE 2: CM12 Y=38 is not effective for a
Single Line station/Virtual Line
station/PS.
NOTE 3: Assign the Start Block No. as fol-
lows:
• 0000-1016: Series 3800 software
or before
• 0000-4086: Series 3900 software
or later
•
(1)
(2)
Y=38
X-XXXXXXXX: Station No.
XXXX ZZ
XXXX: 0000-4086: Start Block No.
ZZ : Number of Memory Block for CID
Call Back
01 : 8 blocks
02 : 16 blocks
03 : 24 blocks
NONE : 4 blocks
Provide the function to register the calling
number into the Redial key on the D
term
when
the call is answered, for the required stations.
•
(1)
(2)
Y=41
X-XXXXXXXX: Station No.
0: To provide
Assign the Message Waiting Search key to the
D
term
s.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0A46: Message Waiting Search
B
CM12
CM13
CM90
,
END
JUNE/01/2007
CID CALL BACK