– 265 – NWA-008845-001 Rev.5.0
32ch1005.fm
DESCRIPTION DATA
Allocate the memory area for Station Speed
Dialing to each station when using Dial By
Name for D
term
One Touch Keys. The same
memory area must be assigned on CM73 and
CM94.
(1)
(2)
X-XXXXXXXX: My Line No.
W XX 0 ZZ
W : 0-9: 1000-Slot Memory Block No.
XX: 00-99: 10-Slot Memory Start Block
No.
ZZ : 01-10: Number of 10-Slot Memory
Blocks
NOTE 1: When Dial By Name is provided using the One Touch Keys, the same memory area must
be specified by CM73 and CM94.
NOTE 2: If the station number is assigned to One Touch Keys using 1000-Slot Memory Block
number 4-9, the lamp does not show the busy state.
Specify the memory area to be used for System
Speed Dialing when using Dial By Name for
System Speed Dialing (1000-Slot Memory).
(1)
(2)
112: 1000-Slot Memory Block No. 0
0 : Available
1 : Not available
(1)
(2)
111: 1000-Slot Memory Block No. 1
0 : Available
1 : Not available
(1)
(2)
176: 1000-Slot Memory Block No. 2
0 : Available
1 : Not available
(1)
(2)
110: 1000-Slot Memory Block No. 3
0 : Available
1 : Not available
B
CM94
CM08
C
DIAL BY NAME
To Next Page
Loading...