– 341 – NWA-008845-001 Rev.5.0
32ch1006.fm
To provide the distinctive ringing patterns to D
term
s in behind PBX, in order to distinguish between an in-
ternal call from the main PBX and an external incoming call:
DESCRIPTION DATA
Specify the interval of ringing tones for sta-
tion-to-station calls.
(1)
(2)
138
0 : External Ringing
1 : Internal Ringing
(See Interval of Ringing Tones by
CM08>392/CM08>396/
CM08>397. Page 337)
Specify the interval of ringing tones until de-
tecting a ringing frequency from the main PBX
(Centrex). Ringing is sent from D
term
until de-
tection of the ringing frequency.
(1)
(2)
380
0 : As per CM08>381
1 : As per CM35 Y=33
(1)
(2)
381
0:No Ringer
1 : Ringing Tone (0.5 seconds) is sent
once
Specify the lamp indication of D
term
until de-
tecting the kind of incoming call from the main
PBX (Centrex).
The lamp is lit until detection of the ringing
frequency.
(1)
(2)
382
0 : Red Steady Light
1 : 120 IPM Flash (As per CM35 Y=32)
Specify the ringing distinction by detecting the
ringing signal from the main PBX (Centrex).
(1)
(2)
366
0 : Longer Ringing than CM41
Y=2>40: External call
Shorter Ringing than CM41
Y=2>40: Internal call
1 : Longer Ringing than CM41
Y=2>40: Internal call
Shorter Ringing than CM41
Y=2>40: External call
NOTE 1: When the ringer is for an internal call, interval of ringing signal: CM08>138
D
term
lamp color: Change to red
D
term
tone ringer: CM35 Y=34, 164, CM65 Y=40
NOTE 2: When the ringer is for an external call, interval of ringing signal: CM35 Y=33
D
term
lamp color: CM35 Y=32
D
term
tone ringer: CM35 Y=34, 164, CM65 Y=40
START
CM08
A
DISTINCTIVE RINGING
To Next Page
Loading...