– 496 – NWA-008845-001 Rev.5.0
32ch1008.fm
To provide Mobility Access (MA), do the following programming.
DESCRIPTION DATA
Assign Service Restriction Class A to each sta-
tion.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Mobility Access mode in Service Re-
striction Class A assigned by CM12 Y=02.
NOTE: This command is set to the Mobility
Access station.
•
(1)
(2)
Y=216
00-15: Service Restriction Class A as-
signed by CM12 Y=02
0 : Restricted
1 : Allow
Assign the following Mobility Access function
to each DID Number.
- For MA termination : 1 (2nd data=0)
- For MA mode setting: 1 (2nd data=1)
- For MA mode cancel: 1 (2nd data=2)
- For MA station : Same number of MA
station (2nd data=7)
•
(1)
(2)
Y=41
000-999: Number Conversion Block No.
assigned by CM76 Y=00/90
0 : To use Mobility Access termination
1 : To set Mobility Access Mode
2 : To cancel Mobility Access Mode
7 : Not used Mobility Access function
Assign a trunk access code for call forwarding
in Mobility Access mode.
•
(1)
(2)
Y=10
00-63: Tenant No.
X-XXXX: Trunk Access Code (1-4 digits)
NONE : No data
START
CM12
CM15
CM76
CM64
END
JUNE/01/2007
MOBILITY ACCESS
To Next Page
Loading...