– 497 – NWA-008845-001 Rev.5.0
32ch1008.fm
• To set or cancel Mobility Access mode from a mobile phone:
• To set or cancel Mobility Access mode from a station:
DESCRIPTION DATA
Assign an access code for Mobility Access. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A231: Station Authorization Code Set/
Change
Assign a Station Authorization Code to each
station.
•
(1)
(2)
Y=00
X-XXXXXXXX: Station No.
X-XXXXXXXX: Authorization Code
NOTE: The maximum number of digits
for Authorization Code is set by
CM42>73.
Specify the number of digits for Station Autho-
rization Code.
(1)
(2)
73
01-08 : 1-8 digits
NONE : 4 digits
DESCRIPTION DATA
Assign an access code for Mobility Access. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A256: Mobility Access Mode Set
A257: Mobility Access Mode Cancel
Assign the function key of Mobility Access
mode Set/Cancel to the designed station.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0B56: Mobility Access Mode Set/Cancel
START
CM20
CM2B
CM42
END
START
CM20
CM90
,
END
NOVEMBER/15/2006
MOBILITY ACCESS
To Next Page
Loading...