Philips Sopho 2000 IPS - Page 529

– 511 – NWA-008845-001 Rev.5.0
32ch1008.fm
To restrict the call termination to D
term
Attendant Position to which Night Mode is set:
[Series 3700 R12.1 software required]
To provide the Attendant Night Transfer when a station/trunk call is terminated to D
term
Attendant Position
to which Night Mode is set:
[Series 3700 R12.1 software required]
DESCRIPTION DATA
Restrict the call termination to D
term
Attendant
Position to which Night Mode is set.
•
(1)
(2)
Y=56
X-XXXXXXXX: Station No.
0: Restricted
Provide the Attendant Night Transfer when a
station/trunk call is terminated to D
term
Atten-
dant Position to which Night Mode is set.
(1)
(2)
576
0: To provide
Not assign transfer destination of station/trunk
call to D
term
Attendant Position to which Night
Mode is set.
•
(1)
(2)
Y=09
00-63: Tenant No.
NONE : No data
DESCRIPTION DATA
Allow the call termination to D
term
Attendant
Position to which Night Mode is set.
•
(1)
(2)
Y=56
X-XXXXXXXX: Station No.
1 : Allowed
Provide the Attendant Night Transfer when a
station/trunk call is terminated to D
term
Atten-
dant Position to which Night Mode is set.
(1)
(2)
576
0: To provide
Assign the transfer destination of station/
Priority Call to D
term
Attendant Position to
which Night Mode is set.
or
Assign the transfer destination of DID/Tie
Line/station call when the called station is set
to Call Forwarding-Busy Line/-No Answer
and the destination of forwarded call is set to
the D
term
Attendant Position to which Night
Mode is set.
•
(1)
(2)
Y=09
00-63: Tenant No.
X-XXXXXXXX: Station No.
START
CM13
CM08
CM51
END
START
CM13
CM08
CM51
END
JULY/01/2006
MULTILINE TERMINAL ATTENDANT POSITION