Philips Sopho 2000 IPS - Page 559

– 541 – NWA-008845-001 Rev.5.0
32ch1009.fm
DESCRIPTION DATA
Assign the destination of Call Forwarding by
Queue Limit for TAS.
•
•
•
•
(1)
(2)
Y=26 Day Mode
Y=27 Night Mode
Y=28 Mode A
Y=29 Mode B
00-63: Trunk No.
X-XXXXXXXX: Station No.
E000 : Attendant Console
EB000-EB127 : Digital Announcement
Trunk No. assigned by
CM10/CM14
When a call is forwarded to the VMS/station/
DAT/Attendant Console by Queue Limit for
TAS, assign the Call Forwarding setting sta-
tion number, which is sent to the destination.
•
(1)
(2)
Y=30
00-63: Tenant No.
X-XXXXXXXX: Station No.
When a Digital Announcement Trunk is set as
the destination of Call Forwarding, set the
function of the Digital Announcement Trunk
as announcement service for Queue Limit for
TAS.
•
(1)
(2)
Y=00
000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
Card No. (EB002-EB127) as-
signed by CM10/CM14
1800: Announcement Service for Queue
Limit for TAS
Provide the system with reset of the Queue
Limit counter for TAS per tenant.
(1)
(2)
602
1: To provide
The system will reset the counter when the fol-
lowing operation has not occurred for about
one hour.
• Increase/decrease of counter
• Incoming calls restricted by Queue Limit
• Call Forwarding to a station/Attendant/
DAT by Queue Limit
A
CM51
CM49
CM08
B
JULY/01/2006
NIGHT SERVICE
QUEUE LIMIT FOR TAS