Philips Sopho 2000 IPS - Page 560

– 542 – NWA-008845-001 Rev.5.0
32ch1009.fm
HARDWARE REQUIRED
When a DAT is used as the destination of Call Forwarding:
DAT card or MP card (built-in DAT)
DESCRIPTION DATA
Specify the timing of Call Forwarding by
Queue Limit for TAS.
•
(1)
(2)
Y=0
42
01-99: 4-396 seconds
(4 second increments)
If no data is set, the default setting is 28-32 sec-
onds.
B
CM41
END
NIGHT SERVICE
QUEUE LIMIT FOR TAS