– 550 – NWA-008845-001 Rev.5.0
32ch1009.fm
DESCRIPTION DATA
Specify the interval of ringing tone for DID in-
coming call with no CLI.
NOTE 1: Assign this command when the ter-
minal destination is SLT or D
term
.
NOTE 2: This command is effective when
CM76 Y=34, 36 is set to 0 or 2.
•
(1)
(2)
Y=38
000-999: Block No.
0 : 0.5 seconds ON-0.5 seconds OFF
(D
term
)
1 second ON-2 seconds OFF (SLT)
1 : 0.5 seconds ON-0.5 seconds OFF -
0.5 seconds ON-1.5 seconds OFF
(D
term
)
0.4 seconds ON-0.2 seconds OFF -
0.4 seconds ON-2 seconds OFF (SLT)
2 : 1 second ON-2 seconds OFF (D
term
or
SLT)
3 : As per CM76 Y=22
[For North America]
Specify a D
term
Ringer Tone Pattern for DID
incoming call with no CLI.
NOTE 1: This command is effective when
CM76 YY=34, 36 is set to 0 or 2,
and D
term
receives the incoming
call.
NOTE 2: For details of the Ringer Tone Pat-
tern, see CM65 Y=40.
•
(1)
(2)
Y=39
000-999: Block No.
0 : Ringer Tone Pattern 0
1 : Ringer Tone Pattern 1
2 : Ringer Tone Pattern 2
3 : Ringer Tone Pattern 3
4 : Ringer Tone Pattern 4
5 : Ringer Tone Pattern 5
6 : Ringer Tone Pattern 6
7 : As per CM76 Y=23
Specify a kind of call termination indicator
key/lamp on Attendant console for DID in-
coming call with no CLI.
NOTE: The command is effective when
CM76 Y=34, 36 is set to 0, and the
destination of call forwarding is At-
tendant console.
•
(1)
(2)
Y=40
000-999: Block No.
0 : C.O. Incoming Call 0
1 : C.O. Incoming Call 1
2 : C.O. Incoming Call 2
3 : C.O. Incoming Call 3
4 : C.O. Incoming Call 4
5 : C.O. Incoming Call 5
6 : C.O. Incoming Call 6
7 : As per CM35 YY=15
B
CM76
END
JULY/01/2006
NO CID CALL ROUTING
To Next Page
Loading...