Philips Sopho 2000 IPS - Page 569

– 551 – NWA-008845-001 Rev.5.0
32ch1009.fm
• For Ring Down calls
DESCRIPTION DATA
Assign the indication of reason why the calling
number is not informed from network to trunk
route.
•
(1)
(2)
Y=133
00-63: Trunk Route No.
0: To indicate
Assign whether the call terminating method is
specified for incoming call with no CLI.
NOTE: Assign the call terminating method
by CM35 Y=255/257 when this
command is set to 0/1.
•
•
(1)
(2)
Y=254 (For Day Mode)
Y=256 (For Night Mode/Mode A/Mode B)
00-63: Trunk Route No.
0 : Specified when reason of the incom-
ing call with no CLI is “privacy”
1 : Specified for all incoming call with no
CLI
3 : Not specified
Assign the specification of the call terminating
method for incoming call with no CLI.
•
•
(1)
(2)
Y=255 (For Day Mode)
Y=257 (For Night Mode/Mode A/Mode B)
00-63: Trunk Route No.
0 : To transfer to the DAT/another station/
Attendant console (assigned by CM51
Y=33)
1 : To reject the call termination
2 : To terminate the D
term
with unusual
LED indication (assigned by CM35
Y=258)
3 : To terminate as usual
START
CM35
A
DECEMBER/02/2005
NO CID CALL ROUTING