– 552 – NWA-008845-001 Rev.5.0
32ch1009.fm
HARDWARE REQUIRED
D
term
with LCD and DLC card
DESCRIPTION DATA
Assign the destination of call forwarding when
the calling number is not informed from net-
work.
NOTE 1: This command needs to be set when
CM35 Y=255/257 is set to 0.
NOTE 2: Assign the function of Digital An-
nouncement Trunk by CM49 Y=00
when this command is set to Digital
Announcement Trunk No.
•
(1)
(2)
Y=33
00-63: Tenant No.
X-XXXXXXXX: Station No.
E000: Attendant
EB000-EB127: Digital Announcement
Trunk No. assigned by
CM10/CM14
NONE : No data
Specify the function of Digital Announcement
Trunk.
NOTE: This command is effective only when
CM51 Y=33 is set to Digital An-
nouncement Trunk No.
•
(1)
(2)
Y=00
000-127: Digital Announcement Trunk No.
assigned by CM51 Y=33
2200 : Announcement Service for no
Caller-ID
NONE : No data
Specify the duration of an Announcement for
no Caller-ID.
NOTE: If the destination of call forwarding
is assigned for Digital Announce-
ment Trunk by CM51 Y=33, when
time out occurs the trunk is released.
•
(1)
(2)
Y=0
45: Announcement Service Timer
01-99 : [0-4 seconds]-[392-396
seconds] (4 seconds increments)
NONE : 16: 60-64 seconds
Specify a distinctive LED indication on D
term
for incoming call with no CLI.
•
(1)
(2)
Y=258
0 : Green (120 IPM)
1 : Red (120 IPM)
NOTE: This command is effective on the following conditions.
• CM35 Y=32 is set to 1.
• CM35 Y=255, 257 are set to 0 or 2, and D
term
receives the incoming call.
A
CM51
CM49
CM41
CM35
END
DECEMBER/02/2005
NO CID CALL ROUTING
To Next Page
Loading...