– 660 – NWA-008845-001 Rev.5.0
32ch1010.fm
To provide SMDR for incoming calls, do the following programming:
DESCRIPTION DATA
Provide SMDR service for incoming calls to
the required stations.
•
(1)
(2)
Y=05
X-XXXXXXXX: Station No.
0: To provide
Provide SMDR service for incoming calls to
the required trunk routes.
•
(1)
(2)
Y=49
00-63: Trunk Route No.
0: To provide
Provide SMDR output for abandoned incom-
ing calls to the required trunk routes.
[Series 3500 software required]
•
(1)
(2)
Y=205
00-63: Trunk Route No.
0: To provide
Specify whether the SMDR service is effective
only for incoming calls with Account Code or
not.
(1)
(2)
426: SMDR for incoming call
0 : Effective for all incoming calls
1 : Effective only for incoming calls with
Account Code
Assign the Charging Station Class number to
each station.
•
(1)
(2)
Y=45
X-XXXXXXXX: Station No.
00-15 : Station Class No.
Assign the Charging Class number to
DESKCON.
•
(1)
(2)
Y=32
0-7: ATTCON No.
00-15 : Class No.
To provide SMDR for incoming calls, do the
following programming.
(1)
(2)
XX 06: Send detail information of C.O./
Tie Line incoming calls to SMDR
terminal 0
XX: Service Class No. assigned by CM12
Y=45/CM60 Y=32
0: Not sent
1: To send
J
CM13
CM35
CM08
CM12
CM60
CMDD04
K
JULY/01/2006
STATION MESSAGE DETAIL RECORDING (SMDR)
PROGRAMMING
To Next Page
Loading...