Philips Sopho 2000 IPS - Page 679

– 661 – NWA-008845-001 Rev.5.0
32ch1010.fm
DESCRIPTION DATA
(1)
(2)
XX 07: Send detail information of C.O./
Tie Line incoming calls to SMDR
terminal 1
XX: Service Class No. assigned by CM12
Y=45/CM60 Y=32
0: Not sent
1: To send
(1)
(2)
XX 09: Send incomplete call information
of C.O./Tie Line incoming calls to
SMDR terminal 0
XX: Service Class No. assigned by CM12
Y=45/CM60 Y=32
0: Not sent
1: To send
(1)
(2)
XX 10: Send incomplete call information
of C.O./Tie Line incoming calls to
SMDR terminal 1
XX: Service Class No. assigned by CM12
Y=45/CM60 Y=32
0: Not sent
1: To send
Specify whether ANI/Caller ID is sent to
SMDR.
NOTE 1: CMDD00>163 is not required for
Extended NEAX 2400 IMS Format
(ANI is always sent in Extended
Format).
NOTE 2: When 0 is set for Former Format,
ANI is not sent to SMDR, but area
code for calling party, area code for
called party; authorization code is
sent to the SMDR.
(1)
(2)
163
0: Not sent
1: To send
K
CMDD04
CMDD00
L
DECEMBER/02/2005
STATION MESSAGE DETAIL RECORDING (SMDR)
PROGRAMMING