– 662 – NWA-008845-001 Rev.5.0
32ch1010.fm
To provide SMDR for tandem calls, do the following programming:
DESCRIPTION DATA
Specify whether the ANI/Caller ID is sent to
SMDR.
NOTE 1: When providing incoming calls with
ANI, assign this data in addition to
the programming for AUTOMATIC
NUMBER IDENTIFICATION
(ANI). Page 120
NOTE 2: When this data is available to 1,
SMDR service for incoming calls is
not provided even if CM13 Y=05 is
0 (To provide).
(1)
(2)
463: ANI/Caller ID to SMDR
0: To send
1: Not sent
DESCRIPTION DATA
Provide the system with SMDR service for
tandem calls.
(1)
(2)
040
0: Available
Specify the direction for sending detail infor-
mation on tandem calls.
(1)
(2)
0: Send detail information of tandem call to
SMDR terminal 0
0: Not sent
1: To send
(1)
(2)
1: Send detail information of tandem call to
SMDR terminal 1
0: Not sent
1: To send
Specify whether account code is sent in the
Authorization Code Area of Call Record.
(1)
(2)
160
0: Not sent
1 : To send
L
CM08
M
M
CM08
CMDD00
N
DECEMBER/02/2005
STATION MESSAGE DETAIL RECORDING (SMDR)
PROGRAMMING
To Next Page
Loading...