– 663 – NWA-008845-001 Rev.5.0
32ch1010.fm
To provide SMDR for abandoned incoming calls, do the following programming:
[Series 3500 software required]
NOTE: To provide SMDR output of abandoned incoming call, the following conditions are required.
- SMDR format : Extended NEAX2400 IMS format (CMDD10>X10: 1)
- MP program : Series 3500 software or later
- AP00 program: AP00B MRC-E or later
DESCRIPTION DATA
Specify whether the SMDR service for incom-
ing calls of each station (assigned by CM13
Y=05) is effective or not.
NOTE: To provide the SMDR for abandoned
incoming calls, assign the second
data of CM08>823 to 0 (Ineffec-
tive).
(1)
(2)
823
0 : Ineffective
1 : Effective
Specify the direction for sending detail infor-
mation on abandoned incoming calls.
(1)
(2)
11: Send detail information of abandoned
incoming call to SMDR terminal 0
0: Not sent
1: To send
(1)
(2)
12: Send detail information of abandoned
incoming call to SMDR terminal 1
0: Not sent
1: To send
N
CM08
CMDD00
O
NOVEMBER/15/2006
STATION MESSAGE DETAIL RECORDING (SMDR)
PROGRAMMING
To Next Page
Loading...