– 778 – NWA-008845-001 Rev.5.0
32ch2001.fm
DESCRIPTION DATA
Specify the action when the number of Wake
Up calls exceeds the maximum number as-
signed by CM42>04.
(1)
(2)
806
0 : Restrict Wake Up call setting
1 : Set to 5 or 10 minutes prior to preset
time
Assign the restriction announcement for Wake
Up call to the DAT card or MP built-in DAT.
•
(1)
(2)
Y=00
000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk No.
(EB002-EB127) assigned by
CM10/CM14
1900: Restriction Announcement for Wake
Up call
Send Wake Up message to PMS when setting
Wake Up feature, if PMS with AP00 on RS-
232C is provided.
(1)
(2)
134
1: To send
Specify the sending of result of Wake Up mes-
sage when performing Wake Up feature.
(1)
(2)
135
1: To send
Specify whether the printing of Wake Up set/
cancel from Front Desk Terminal is available
or not.
NOTE: This data is effective when Wake Up
is set/canceled to individual station
from Front Desk Terminal.
(1)
(2)
156
0 : Available
1 : Not available
Assign the Service Class number for CMD016
to required stations, if PMS with AP00 on RS-
232C is provided.
(1)
(2)
X-XXXX: Guest/Administrative station
No.
00 -15: Service Class No.
Send Room Status Code which includes Wake
Up record, to PMS, if PMS with AP00 on RS-
232C is provided.
(1)
(2)
XX 05: Room Status Code sending to PMS
XX : Service Class No. assigned by
CMD015
1: To send
F
CM08
CM49
CMD000
CMD015
CMD016
END
JUNE/01/2007
HOTEL SYSTEM PROGRAMMING
AUTOMATIC WAKE UP
To Next Page
Loading...