Philips Sopho 2000 IPS - Page 795

– 777 – NWA-008845-001 Rev.5.0
32ch2001.fm
DESCRIPTION DATA
When providing DAT, assign the answering
message for Wake Up to the DAT card or MP
built-in DAT.
•
(1)
(2)
Y=00
000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
Card No. assigned by CM10/
CM14
0C XX: Answering message on Automatic
Wake Up
XX : 00-63: Message No.
•
(1)
(2)
Y=08
00-63: Tenant No.
00-63: Message No. assigned by CM49
Y=00
Specify the duration of Wake Up call. •
(1)
(2)
Y=0
23
02-14: 8-56 seconds
(4 second increments)
If no data is set, the default setting is 28-32
seconds.
When providing the DAT, specify the duration
of message replay timer for Automatic Wake
Up.
•
(1)
(2)
Y=0
52
01-99: 0-396 seconds
(4 second increments)
If no data is set, the default setting is 60-64
seconds.
Specify the number of Wake Up call attempts
before abandonment.
(1)
(2)
03
01-05 : 1 call-5 calls
NONE : 5 calls
Specify the maximum number of Wake Up
calls can be set at the same time.
NOTE: This command is effective up to Se-
ries 3400 software.
(1)
(2)
04
01-32 : 1 station-32 stations
NONE : 10 stations
E
CM49
CM41
CM42
F
JUNE/01/2007
HOTEL SYSTEM PROGRAMMING
AUTOMATIC WAKE UP