– 819 – NWA-008845-001 Rev.5.0
32ch2001.fm
DESCRIPTION DATA
Assign access code for Message Waiting Set/
Reset/Retrieve from administrative station, if
required.
NOTE 2: This data assignment is not required
when Message Waiting is set by
PMS.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A040: MW Lamp Control-Set
A041: MW Lamp Control-Reset
A147: MW Retrieve
Assign the Message Front destination to be
routed by dialing MW Retrieve code or press-
ing MW key on D
term
to which Message Wait-
ing is set.
•
(1)
(2)
Y=15
00-63: Tenant No. to which MW set D
term
belongs
X-XXXXXX: Station No./My Line No.
or
E000: Attendant Console
If an Attendant Console is assigned to as the
Message Front destination by CM51 Y=15, set
the data for 233 to 0 and set the data for 234 to
1. With this setting, Message Waiting is auto-
matically reset when the Attendant answers.
(1)
(2)
(1)
(2)
233
0: Available
234
1 : Not available
To reset Message Waiting while the Message
Front station or attendant rings, set the data for
234 to 0.
(1)
(2)
234
0: Available
To reset Message Waiting when the desired
station answers a second call from the Message
Front station or attendant, set the data for 235
to 0 and set the data for 234 to 1.
(1)
(2)
(1)
(2)
235
0: Available
234
1 : Not available
Specify whether Message Waiting record is
printed out on Hotel Printer, and the report is
sent to PMS when setting or resetting Message
Waiting.
(1)
(2)
267
0 : Available
1 : Not available
A
CM20
CM51
CM08
B
JUNE/01/2007
HOTEL SYSTEM PROGRAMMING
MESSAGE WAITING
To Next Page
Loading...