R&S FSW Series - Page 1115

Remote Commands
R&S
®
FSW
1115User Manual 1173.9411.02 ─ 43
Suffix:
<p>
.
Power sensor index
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example:
PMET1:UPD ON
The data from power sensor 1 is updated continuously.
Manual operation: See "Continuous Value Update" on page 376
UNIT<n>:PMETer<p>:POWer <Unit>
This command selects the unit for absolute power sensor measurements.
Suffix:
<n>
.
irrelevant
<p> Power sensor index
Parameters:
<Unit> DBM | WATT | W | DB | PCT
*RST: DBM
Example:
UNIT:PMET:POW DBM
Manual operation: See "Unit/Scale" on page 377
UNIT<n>:PMETer<p>:POWer:RATio <Unit>
This command selects the unit for relative power sensor measurements.
Suffix:
<n>
.
irrelevant
<p> Power sensor index
Parameters:
<Unit> DB | PCT
*RST: DB
Example:
UNIT:PMET:POW:RAT DB
Manual operation: See "Unit/Scale" on page 377
Triggering with Power Sensors
[SENSe:]PMETer<p>:TRIGger:DTIMe............................................................................ 1116
[SENSe:]PMETer<p>:TRIGger:HOLDoff..........................................................................1116
[SENSe:]PMETer<p>:TRIGger:HYSTeresis..................................................................... 1116
Setting Basic Measurement Parameters