To Next Page

To Previous Page

Remote Commands

R&S

FSW

1305User Manual 1173.9411.02 ─ 43

SMSG

(default) Queries the system messages which occurred during

manual operation.

REMote

Queries the error messages that occurred during remote opera-

tion.

Note: The remote error list is automatically cleared when the

R&S FSW is shut down.

Return values:

<SystemMessages> String containing all messages in the "System Messages" table.

Comma-separated list of errors from the "Remote Errors" table,

where:

<Error_no>: device-specific error code

<Description>: brief description of the error

<Command>: remote command causing the error

<Date>|<Time>: date and time the error occurred

Usage: Query only

SYSTem:ERRor[:NEXT]?

This command queries the most recent error queue entry and deletes it.

Positive error numbers indicate device-specific errors, negative error numbers are error

messages defined by SCPI. If the error queue is empty, the error number 0, "No error",

is returned.

For details on error queues see Chapter 13.1.7, "Status Reporting System",

on page 751.

Usage:

Query only

SYSTem:FIRMware:UPDate <Directory>

This command starts a firmware update using the *.msi files in the selected directory.

The default path is D:\FW_UPDATE. The path is changed via the MMEMory:COMMent

command. To store the update files the MMEMory:DATA command is used.

Only user accounts with administrator rights can perform a firmware update.

Setting parameters:

Example:

SYST:FIRM:UPD 'D:\FW_UPDATE'

Starts the firmware update from directory "D:\FW_UPDATE".

Configuring the R&S FSW

R&S FSW Series User Manual

Questions and Answers: