R&S FSW Series - Page 1316

Remote Commands
R&S
®
FSW
1316User Manual 1173.9411.02 ─ 43
ALL | 1
Turns on synchronization.
NONE | 0
Turns off synchronization.
*RST: ALL
Example:
INST:COUP:PRES ALL
Synchronizes the preselector configuration.
INSTrument:COUPle:RLEVel <State>
This command turns synchronization of the reference level between measurement
channels on and off.
Parameters:
<State> ALL | NONE
ALL | 1
Turns on synchronization.
NONE | 0
Turns off synchronization.
*RST: NONE
Example:
INST:COUP:RLEV ALL
Manual operation: See "Synchronizing parameters across all measurement chan-
nels" on page 720
INSTrument:COUPle:SPAN <State>
This command turns synchronization of the start and stop frequency between mea-
surement channels on and off.
Parameters:
<State> ALL | NONE
ALL | 1
Turns on synchronization.
NONE | 0
Turns off synchronization.
*RST: NONE
Example:
INST:COUP:SPAN ALL
Synchronizes the start and stop frequency.
Manual operation: See "Synchronizing parameters across all measurement chan-
nels" on page 720
Configuring the R&S FSW