R&S FSW Series User Manual

Remote Commands
R&S
®
FSW
1318User Manual 1173.9411.02 ─ 43
<Name>
To synchronize two specific measurement channels.
'All Spectrum'
To synchronize all spectrum channels.
'All IQ Analyzer'
To synchronize all I/Q analyzer channels.
'All Analog Demod'
To synchronize all analog demodulation channels.
'All Channels'
To synchronize all channels, regardless of their type.
<Window> String containing the name of a measurement window.
<Name>
To synchronize a specific window (only possible in the Analog
Demodulation application).
'All Windows'
To synchronize all measurement windows.
<Parameter> String containing the name of a synchronizable parameter.
<ChannelName> String containing the name of a measurement channel or chan-
nel type.
The second channel name is only necessary for synchronization
between two specific channels. If you synchronize all channels
of the same type or all channels, the string has to be empty.
<Window> String containing the name of a measurement window.
The second window name is only necessary for synchronization
between two specific channels. If you synchronize all channels
of the same type or all channels, the string has to be empty.
<Parameter> String containing the name of a synchronizable parameter.
The second parameter name is only necessary for synchroniza-
tion between two specific channels. If you synchronize all chan-
nels of the same type or all channels, the string has to be empty.
<arg6> LTOR | RTOL | BIDir
Selects the direction in which synchronization works.
BIDir
Changes of a parameter are applied both ways (from channel 1
to channel 2 and vice versa).
LTOR
Changes of a parameter are applied from channel 1 to channel
2, but not the other way around.
RTOL
Changes of a parameter are applied from channel 2 to channel
1, but not the other way around.
<State>
ON | OFF | 0 | 1
Enables or disables the coupling
Configuring the R&S FSW

R&S FSW Series Specifications

General

Brand	R&S
Model	FSW Series
Category	Measuring Instruments
Language	English