R&S FSW Series - Page 1322

Remote Commands
R&S
®
FSW
1322User Manual 1173.9411.02 ─ 43
<Window> String containing the name of a measurement window.
The second window name is only necessary for synchronization
between two specific channels. If you synchronize all channels
of the same type or all channels, the string has to be empty.
<Parameter> String containing the name of a synchronizable parameter.
The second parameter name is only necessary for synchroniza-
tion between two specific channels. If you synchronize all chan-
nels of the same type or all channels, the string has to be empty.
<Direction> LTOR | RTOL | BIDir
Optional: Selects the direction in which synchronization works.
BIDir
Changes of a parameter are applied both ways (from channel 1
to channel 2 and vice versa).
LTOR
Changes of a parameter are applied from channel 1 to channel
2, but not the other way around.
RTOL
Changes of a parameter are applied from channel 2 to channel
1, but not the other way around.
<State>
ON | OFF | 0 | 1
Optional. Enables or disables coupling.
OFF | 0
Switches the coupling off
ON | 1
Switches the coupling on
*RST: 1
Return values:
<Index> Index number of the new user-defined coupling.
Note that the returned index numbers do not necessarily have to
be the same as those shown in the user interface.
Example:
INST:COUP:USER:NEW? 'Spectrum1','All
Windows','Attenuation','Spectrum2','All
Windows','Attenuation',BID,ON
Result:
3
Synchronizes the attenuation between the channels named
'Spectrum1' and 'Spectrum2' in both directions and turns on the
coupling. Also returns the index number of the user-defined cou-
pling.
Configuring the R&S FSW