R&S FSW Series User Manual

Remote Commands
R&S
®
FSW
849User Manual 1173.9411.02 ─ 43
Suffix:
<ch>
.
1..n
Alternate channel number
Parameters:
<Alpha> Roll-off factor
Range: 0 to 1
*RST: 0.22
Manual operation: See "Weighting Filters" on page 176
See "Weighting Filters" on page 187
[SENSe:]POWer:ACHannel:FILTer:ALPHa:CHANnel<ch>
<Alpha>
This command defines the roll-off factor for the transmission channel weighting filter.
Suffix:
<ch>
.
1..n
Tx channel number
Parameters:
<Alpha> Roll-off factor
Range: 0 to 1
*RST: 0.22
Manual operation: See "Weighting Filters" on page 176
[SENSe:]POWer:ACHannel:FILTer[:STATe]:ACHannel <State>
This command turns the weighting filter for the adjacent channel on and off.
For asymmetrical MSR signals, this command turns the weighting filter for the lower
adjacent channel on and off. To configure the filter state for the upper adjacent chan-
nel, use the [SENSe:]POWer:ACHannel:FILTer[:STATe]:UACHannel com-
mand.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Manual operation: See "Weighting Filters" on page 176
See "Weighting Filters" on page 187
[SENSe:]POWer:ACHannel:FILTer[:STATe][:ALL] <State>
This command turns the weighting filters for all channels on and off.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Configuring and Performing Measurements

R&S FSW Series Specifications

General

Brand	R&S
Model	FSW Series
Category	Measuring Instruments
Language	English