Operating Components
Driver’s seat
66 / 476
Weight adjustment
The seat should be adjusted for the dri-
ver’s weight by briefly pulling the actu-
ator lever of the automatic weight and
height adjuster (arrow) with the vehicle
at a standstill and the driver sitting on the
seat.
The driver must sit absolutely still during
adjustment.
To prevent damage to the health, the
setting for the driver’s weight must be
checked and adjusted as necessary
before the vehicle is driven.
Height adjustment
The seat height can be set pneumatically
and is infinitely adjustable.
The seat height can be altered by pulling
or pressing the actuator lever (arrow). If
the adjustment reaches the top or bottom
end stop, the height is adjusted automat-
ically in order to guarantee a minimum
spring travel.
In order to avoid damage, do not operate
compressor for more than 1 minute.
Shock absorption
The damping of the seat can be adjusted
to suit the characteristics of the road or
field surface.
The comfort of the suspension can be
adjusted for the individual. Rotate the
lever to the desired setting and release.
Position 1 = soft
Position 2 = medium
Position 3 = hard
The manufacturer recommends position 2
as the basic setting for drivers of average
weight.
To Next Page
Loading...
