Ruijie RG-S2600G-I Series User Manual

CLI Reference Guide CLI Authorization Configuration Commands
Usage
guidelines
The following table lists some key words that can be
authorized by command privilege in the CLI mode. The
number of command modes that can be authorized may
vary with different devices. In the global configuration
mode, you can use privilege ? to list all CLI command
modes that can be authorized.
Mode
Descripton
config
Global configuration mode.
exec
Privileged EXEC mode
interface
Interface configuration mode
ip-dhcp-pool
DHCP address pool configuration
mode
keychain
KeyChain configuration mode
keychain-key
KeyChain-key configuration
mode
time-range
Time-Range configuration mode
Examples
Set the password of CLI level 1 as test and attribute the reload rights
to reset the device:
Ruijie(config)#enable secret level 1 0 test
Ruijie(config)#privilege exec level 1 reload
After the above setting, you can access the CLI window as level-1
user to use the reload command:
Ruijie>reload ?
LINE Reason for reload
<cr>
You can use the key word all to attribute all sub-commands of reload
to level-1 users:
Ruijie(config)# privilege exec all level 1 reload
After the above setting, you can access the CLI window as level-1
user to use all sub commands of the reload command:
Ruijie>reload ?
LINE Reason for reload
at reload at a specific time/date
cancel cancel pending reload scheme

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English