Ruijie RG-S2600G-I Series - Show Arp Timeout

CLI Reference IP Address Configuration Commands
Configuration
Examples
Related
Commands
Command
Description
N/A.
N/A.
Platform
Description
This command is supported on switches, but not on routers.
show arp timeout
Use this command to show the aging time of a dynamic ARP entry on the interface.
show arp timeout
Parameter
Description
Parameter
Description
N/A.
N/A.
Defaults
N/A.
Command
Mode
Any.
Usage Guide
N/A.
Configuration
Examples
The following is the output of the show arp timeout command:
Ruijie# show arp timeout
Interface arp timeout(sec)
---------------------- ----------------
VLAN 1 3600
The meaning of each field in the ARP cache table is described in Table 1.