CLI Reference IPv6 Configuration Commands
Use this command to show the information of the general prefix.
Use this command to show the information of the general prefix including the manually configured
and learned from the DHCPv6 agent.
The following example shows the information of the general prefix
Ruijie# show ipv6 general-prefix
There is 1 general prefix.
IPv6 general prefix my-prefix, acquired via Manual configuration
2001:1111:2222::/48
2001:1111:3333::/48
Configure the general prefix.
Use this command to show the IPv6 interface information.
show ipv6 interface [ interface-id ] [ ra-info ]
Interface (including Ethernet interface, aggregateport, or SVI)
To Next Page
Loading...
Need help?
General