CLI ReferenceInterface Configuration Commands Interface Configuration Commands
interface fastEthernet
Use this command to select an Ethernet interface, and enter the interface
configuration mode.
interface fastEthernet mod-num/port-num
The range varies with the device and the extended module.
Global configuration mode.
The command does not support the no parameter, so this interface type cannot be
deleted. Use show interfaces or show interfaces fastEthernet to display the
interface configuration.
Ruijie(config)# interface fastEthernet 1/2
Ruijie(config-if)#
Show the interface information.
interface giagbitEthernet
Use this command to select a Gigabit Ethernet interface, and enter the interface
configuration mode.
interface gigabitEthernet mod-num/port-num
The range varies with the device and the extended module.
Global configuration mode.