CLI ReferenceInterface Configuration Commands LLDP Configuration Commands
Ports : Gi0/1
--------------------------
Identifier : tee
--------------------------
Show all urgent phone number information.
Ruijie# show lldp location elin static
Elin location information
--------------------------
Identifier : t
Elin : iiiiiiiiii
Ports : Gi1/0/3
--------------------------
Only supported by switch products.
Show the LLDP information of neighbor devices.
show lldp neighbors [ interface interface-name ] [ detail ]
Show all information of neighbor devices.
If the detail parameter is not specified, show the abstract information of neighbor devices.
If the detail parameter is specified, show the detailed information of neighbor devices.
If the interface parameter is specified, show the neighbor information received by the interface.
Show the neighbor information received by all interfaces.
Ruijie# show lldp neighbors detail
Lldp neighbor-information of port [GigabitEthernet 0/1]
Neighbor index : 1
To Next Page
Loading...
Need help?
General