Ruijie RG-S2600G-I Series User Manual

CLI Reference SEM Configuration Commands
sub-system
sub-system-id
Subsystem of the published event.
type event-type
Subtype of the published event.
arg1 argument-data
(optional) parametr1 of the event.
arg2 argument-data
(optional) parametr2 of the event.
arg3 argument-data
(optional) parametr3 of the event.
arg4 argument-data
(optional) parametr4 of the event.
Default
configuration
By default, no action is configured.
Command
mode
SEM configuration mode
Usage
Guideline
This configuration is used with the event application. When the policy
running the action publish-event has generated the message, the event
application with the same sub-system and type will be triggered.
Examples
The following example monitors the event published by the action
publish-event with the sub-system ID being 100 and type ID being 50,
record logs after being triggered.
Ruijie(config)#smart manager applet Test_1
Ruijie(config-applet)#event tag monitor_event none
Ruijie(config-applet)#action 00 publish-event sub-system 100 type
50 arg1 para_1
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Related
commands
Command
Description
smart manager
applet
Define the command line based SEM policy.
event application
action reload
Use this command to reload the device in SEM configuration mode. The no form of this
command deletes the action with the specified label.

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English