CLI Reference Guide Syslog Configuration Commands
Show the logs and related log configuration parameters in
the buffer.
logging count
Use this command to enable the log statistics function. The no form of the command deletes the log
statistics and disables the statistics function.
logging count
no logging count
Global configuration mode.
This command enables the log statistics function. The statistics begins when the function is
enabled. If you run no logging count, the statistics function is disabled and the statistics data is
deleted.
Enable the log statistics function:
Ruijie(config)# logging count
Show the logs and related log configuration parameters
in the buffer.
logging facility
Use this command to configure the log device. The no form of the command restores it to the default
device value (23).
logging facility facility-type
To Next Page
Loading...
Need help?
General