Ruijie RG-S2600G-I Series - Show Ip Arp

CLI Reference IP Address Configuration Commands
Related
Commands
Command
Description
N/A.
N/A.
Platform
Description
This command is not supported on the Layer 2 switch.
show ip arp
Use this command to show the Address Resolution Protocol (ARP) cache table in the
privileged user mode.
show ip arp
Parameter
Description
Parameter
Description
N/A.
N/A.
Defaults
N/A.
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A.
Configuration
Examples
RThe following is the output of show ip arp:
Ruijie# show ip arp
Protocol Address Age(min)Hardware Type Interface
Internet 192.168.7.233 23 0007.e9d9.0488 ARPA FastEthernet
0/0
Internet 192.168.7.112 10 0050.eb08.6617 ARPA FastEthernet
0/0
Internet 192.168.7.79 12 00d0.f808.3d5c ARPA FastEthernet
0/0
Internet 192.168.7.1 50 00d0.f84e.1c7f ARPA FastEthernet
0/0
Internet 192.168.7.215 36 00d0.f80d.1090 ARPA FastEthernet
0/0
Internet 192.168.7.127 0 0060.97bd.ebee ARPA FastEthernet
0/0
Internet 192.168.7.195 57 0060.97bd.ef2d ARPA FastEthernet
0/0
Internet 192.168.7.183 -- 00d0.f8fb.108b ARPA FastEthernet
0/0
Each field in the ARP cache table has the following meanings: