Ruijie RG-S2600G-I Series User Manual

CLI ReferenceInterface Configuration Commands MSTP Configuration Commands
MSTP Configuration Commands
bpdu src-mac-check
This command is used to enable the BPDU source MAC address check function on an
interface. Use the no option of this command to disable the function.
bpdu src-mac-check H.H.H
no bpdu src-mac-check
Parameter
Description
Parameter
Description
H.H.H
Indicates that only the BPDU frames from this MAC address are
received.
no
Indicates that the BPDU frames from any MAC address are
received.
Defaults
Disabled
Command Mode
Interface configuration mode
Usage Guide
-
Configuration
Examples
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# bpdu src-mac-check 00d0.f800.1e2f
Related Commands
Command
Description
-
-
Platform Description
-
clear spanning-tree counters
This command is used to clear statistics of STP receiving/transmitting packets.
clear spanning-tree counters [ interface interface-id ]
Parameter
Description
Parameter
Description
interface-id
ID of the corresponding interface
Defaults
N/A

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English