CLI Reference Guide QoS Configuration Commands
show mls qos maps
Use this command to show QoS maps.
show mls qos maps [cos-dscp | dscp-cos | ip-prec-dscp]
Show the ip-prec-dscp maps.
All QoS maps are shown by default.
Ruijie# show mls qos maps
show mls qos rate-limit
Use this command to show the information about rate limit on the interface.
show mls qos rate-limit [interface interface-id]
Ruijie# show mls qos rate-limit
show virtual-group
Use this command to show the virtual group information.
show virtual-group [virtual-group-number | summary]
Virtual group number, up to 128.
To Next Page
Loading...
Need help?
General