CLI Reference Guide SRM Configuration Commands
user group
In the srm configuration mode, execute "user group" command to create the resource user group
and enter the config-res-group configuration mode.
user group resource-group-name
no user group resource-group-name
Name of resource user group.
Remove the resource user group.
Example 1: Configure a resource user group named
rgos_group.
Ruijie#configure terminal
Ruijie(config)#resource manager
Ruijie(config-srm)#user group rgos_group
Router(config-res-group)#
Enter the SRM configuration mode.
show resource database
Display the SRM database information, including information about resource owner, resource
user group and resource users.
show resource database [slot slot-id [subsystem subsystem-id]]
Specify the board card to be displayed.
To Next Page
Loading...
Need help?
General