Ruijie RG-S2600G-I Series User Manual

CLI ReferenceInterface Configuration Commands Voice VLAN Configuration Commands
Voice VLAN Configuration Commands
Configuration Related Commands
voice vlan
Use this command to enable Voice VLAN in the global configuration mode. Use the no form of this
command to disable this function.
voice vlan vlan-id
no voice vlan
Parameter
description
Parameter
Description
vlan-id
The Voice VLAN ID.
Default
Settings
Disabled
Command
mode
Global configuration mode.
Usage
guidelines
Use this command to enable the Voice VLAN and specify
the Voice Vlan ID.
 Caution:
1) The corresponding VLAN shall be created before
configuring the Voice VLAN;
2) The default VLAN is VLAN1 and cannot be set as the
Voice VLAN;
3) A VLAN is not allowed to be set as the Voice VLAN
and the Super VLAN at the same time;
4) With 802.1x VLAN auto-switching function enabled,
the assigned VID shall not be set as the Voice VLAN
ID;
5) RSPAN Remote VLAN and Voice VLAN cannot be
the same VLAN, or it influences the remote port mirror
and the Voice VLAN function.
Examples
The following example shows how to set the VLAN2 as the Voice
VLAN:
Ruijie(config)# vlan 2

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English