Ruijie RG-S2600G-I Series User Manual

CLI Reference DHCP Snooping Configuration Commands
DHCP Snooping Configuration Commands
ip dhcp snooping
Use this command to enable the DHCP snooping function globally. The no form of this command will
disable the DHCP snooping function globally.
[no] ip dhcp snooping
Parameter
description
N/A.
Default
Disabled
Command
mode
Global configuration mode
Usage
guidelines
Enable the DHCP snooping function on the switch. You can use the show ip
dhcp snooping command to view whether the DHCP snooping function is
enabled.
Note that DHCP Snooping cannot coexist with private VLAN.
Examples
The following is an example of enabling the DHCP snooping function.
Ruijie# configure terminal
Ruijie(config)# ip dhcp snooping
Ruijie(config)# end
Ruijie# show ip dhcp snooping
Switch DHCP snooping status: ENABLE
DHCP snooping Verification of hwaddr field status: DISABLE
DHCP snooping database write-delay time: 0 seconds
DHCP snooping option 82 status: ENABLE
DHCP Snooping Support Bootp bind status: ENABLE
Interface Trusted Rate limit (pps)
------------------------ ------- ---------------
Related
commands
Command
Description
show ip dhcp
snooping
View the configuration information of DHCP
snooping.
ip dhcp snooping vlan
Configure DHCP snooping enabled VLAN.

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English