Ruijie RG-S2600G-I Series - Show Dot1 X

CLI Reference 802.1X Configuration Commands
show dot1x
Use this command to view 802.1x settings.
show dot1x
Parameter
Description
-
Defaults
-
Command Mode
Privileged mode
Usage Guide
Configuration
Examples
The following example shows how to view 802.1x settings:
Ruijie# show dot1x
802.1X Status: Enabled
Authentication Mode: EAP-MD5
Authed User Number: 0
Re-authen Enabled: Disabled
Re-authen Period: 3600 sec
Quiet Timer Period: 10 sec
Tx Timer Period: 3 sec
Supplicant Timeout: 3 sec
Server Timeout: 5 sec
Re-authen Max: 3 times
Maximum Request: 3 times
Filter Non-RG Supp: Disabled
Client Oline Probe: Disabled
Eapol Tag Enable: Disabled
Authorization Mode: Group Server
Ruijie#
Related Commands
Command
Description
dot1x auth-mode
It is used to set the 802.1x authentication mode.
dot1x max-req
It is used to set the maximum number of authentication
request re-transmission times.
dot1x port-control
auto
It is used to set a port to participate in authentication.
dot1x reauth-max
It is used to set the maximum number of applicant
re-authentication times.
dot1x
re-authentication
It is used to set whether periodic re-authentication is
required.
dot1x timeout
It is used to set the waiting time for re-authentication.