CLI Reference CFM Configuration Commands
cfm loopback service-instance instance-id mep mep-id {remote-mep remote-mep-id | remote-mac mac-address}
[count count]
Service instance id, in the range of
1-32767.
MEP(maintenance association end
point) id, in the range of 1-8191.
MAC address of the remote MP
(including the maintenance association
end point and maintenance domain
intermediate point).
The number of the LBM to be sent.
Ruijie# cfm loopback service-instance 1 mep 100 remote-mep 200 count
3
show cfm md
Use this command to show the maintenance domain configurations.
show cfm md
To Next Page
Loading...
Need help?
General