CLI Reference CFM Configuration Commands
Set the maintenance domain.
show cfm ma md
Use this command to show the maintenance association configurations.
show cfm ma [ma-name] md [md-name]
Maintain association name.
By default, all maintenance associations are shown.
The example below shows the MD_A MA_A_MD_A configuration.
Ruijie# show cfm ma MA_A_MD_A md MD_A
The example below shows the MD_A MA configuration.
Ruijie# show cfm ma md MD_A
The example below shows the MA configurations.
Ruijie# show cfm ma
Set the maintenance association.
To Next Page
Loading...
