Ruijie RG-S2600G-I Series User Manual

CLI ReferenceInterface Configuration Commands LLDP Configuration Commands
Platform
description
Only supported by switch products.
lldp mode
Configure the LLDP operating mode. Use no form of this command to disable LLDP operating mode.
lldp mode {rx | tx | txrx }
no lldp mode
Parameter
description
Parameter
Description
rx
Only sending LLDPDUs.
tx
Only receiving LLDPDUs.
txrx
Sending and receiving LLDPDUs
Default
txrx
Command
mode
Interface configuration mode
Usage
guidelines
 Disable LLDP operating mode on the interface. The interface won't send and receive LLDP
packets.
 The precondition for enabling LLDP on the interface is that LLDP has been enabled globally and
LLDP operates in tx, rx or txrx mode.
Examples
Configure LLDP operating mode as tx on the interface:
Ruijie# configure terminal
Ruijie(config)#interface gigabitethernet 0/1
Ruijie(config-if-GigabitEthernet 0/1)#lldp mode tx
Related
commands
Command
Description
show lldp status
Display LLDP status information
Platform
description
Only supported by switch products.
lldp network-policy profile
Create an LLDP network policy and enter the LLDP network policy configuration mode. Use no form of
this command to delete the LLDP network policy.
lldp network-policy profile profile-num
no lldp network-policy profile profile-num

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English